|
|
The World's Leading Retaining Ring Manufacturer ring rings,retaining ring,rings,ring, snap rings, snap ring,
internal rings, external rings, fasteners, circlips, fixings,rotor clip, roto clip,
roto-clip, axial, axial installation, axially assembled, ring samples, ring explanations |
|
NEED
RETAINING RINGS?
Download Rotor Clip Catalog Specifications in .pdf file
format. Click on the ring type you need. If you are not sure of the type of ring needed,
click on our Interactive Design Guide or e mail for
technical assistance.
Click ring designation for catalog specifications in .pdf File Format.
Note: To download .pdf files, Adobe® Reader is needed. To get Adobe® Reader click below.
Down Load Adobe Reader! Request Samples
|
 |
HO
Internal Inch- Once installed in the groove of a housing/bore, the portion of the
ring protruding from the groove (also called a "shoulder") holds an assembly in
place. Size Ranges: HO--.250-10.0 Inches; DHO-8.0mm-400mm; DHR-20mm-100mm;
MHO--.8mm-250mm.
|
 |
SH
External Inch- Once installed in the groove of a shaft, the portion of the ring
protruding from the groove (also called a "shoulder") holds an assembly in
place. Size Ranges: SH--.125-10.0 Inches; DSH-3.0mm-400mm; MSH--.4mm-100mm.
|
 |
HOI
Internal Inverted Inch- Functions like an HO ring in a housing/bore, only the
lugs are "reversed." This version reduces the distance the lugs of the standard
HO extend into the inner circumference of the housing/bore and allows for another assembly
to pass through unimpeded.
Size Range: HOI--.625-4 Inches; DHI-12mm-100mm.
|
 |
SHI
External Inverted Inch- Functions like an SH ring on a shaft, only the lugs are
"reversed." This version reduces the distance the lugs of the standard SH extend
beyond the circumference of the shaft. The shaft can then be used in an application where
clearance is minimal.
Size Range: SHI--.500-3.98 Inches; DSI-12mm-100mm.
|
 |
SHR
External Reinforced Inch- An extra thick version of a regular SH retaining ring.
As such, it is stronger and can withstand greater thrust loads than its standard
counterpart. Size Range: SHR--.394-2.0 Inches; DSR-12mm-100mm, MSR—10mm-50mm.
|
 |
SHM
External Miniature Inch- This ring does not have any lugs making it tamper proof
once installed. Size Range: .101-.375 Inches.
|
 |
BHO
Internal Bowed Inch- Compensating for accumulated tolerances is what a BHO
retaining ring is designed to do in a housing/bore. Once snapped into the groove, bowed
rings exert a force or a "preload" on the retained parts for the range specified
in the catalog. Size Range: BHO-.250-1.750 Inches.
|
 |
BSH
External Bowed Inch- Compensating for accumulated tolerances is what a BSH
"Bowed" retaining ring is designed to do on a shaft. Once snapped into the
groove, bowed rings exert a force or a "preload" on the retained parts for the
range specified in the catalog. Size Range; BSH--.250-1.750 Inches.
|
 |
VHO
Internal Beveled Inch- These rings look exactly like their HO counterpart,
only they have a 15° angle on the outer edge. This combines with a complementary groove
angle to eliminate end play by wedging itself between the groove and the retained part. Size
Range: VHO-1.0-10.0 Inches.
|
 |
VSH
External Beveled Inch- These rings look exactly like their SH counterpart, only
they have a 15° angle on the inner edge. This combines with a complementary groove angle
to eliminate end play by wedging itself between the groove and the retained part. Size
Range: VSH—1.0-10.0 Inches.
|
|
|
© 2001 ROTOR CLIP COMPANY, INC.
|